Enhanced PHP File Manager

⬆️ Go Up (..)

📊 Server Information

Server:

LiteSpeed

System:

Linux 4.18.0-553.34.1.lve.el8.x86_64

PHP Version:

8.1.34

User:

u823300664

Directory:

/home/u823300664/public_html/app.allspikes.in/vendor/google/apiclient-services/src/Compute/Resource

Free Space:

1.88 TB

🔧 Quick Actions

✏️ Editing: Routers.php

<?php
/*
 * Copyright 2014 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not
 * use this file except in compliance with the License. You may obtain a copy of
 * the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 * License for the specific language governing permissions and limitations under
 * the License.
 */

namespace Google\Service\Compute\Resource;

use Google\Service\Compute\NatIpInfoResponse;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Router;
use Google\Service\Compute\RouterAggregatedList;
use Google\Service\Compute\RouterList;
use Google\Service\Compute\RouterStatusResponse;
use Google\Service\Compute\RoutersPreviewResponse;
use Google\Service\Compute\VmEndpointNatMappingsList;

/**
 * The "routers" collection of methods.
 * Typical usage is:
 *  <code>
 *   $computeService = new Google\Service\Compute(...);
 *   $routers = $computeService->routers;
 *  </code>
 */
class Routers extends \Google\Service\Resource
{
  /**
   * Retrieves an aggregated list of routers. To prevent failure, Google
   * recommends that you set the `returnPartialSuccess` parameter to `true`.
   * (routers.aggregatedList)
   *
   * @param string $project Project ID for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param bool includeAllScopes Indicates whether every visible scope for
   * each scope type (zone, region, global) should be included in the response.
   * For new resource types added after this field, the flag has no effect as new
   * resource types will always include every visible scope for each scope type in
   * response. For resource types which predate this field, if this flag is
   * omitted or false, only scopes of the scope types where the resource type is
   * expected to be found will be included.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @opt_param string serviceProjectNumber The Shared VPC service project id or
   * service project number for which aggregated list request is invoked for
   * subnetworks list-usable api.
   * @return RouterAggregatedList
   * @throws \Google\Service\Exception
   */
  public function aggregatedList($project, $optParams = [])
  {
    $params = ['project' => $project];
    $params = array_merge($params, $optParams);
    return $this->call('aggregatedList', [$params], RouterAggregatedList::class);
  }
  /**
   * Deletes the specified Router resource. (routers.delete)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to delete.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function delete($project, $region, $router, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router];
    $params = array_merge($params, $optParams);
    return $this->call('delete', [$params], Operation::class);
  }
  /**
   * Returns the specified Router resource. (routers.get)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to return.
   * @param array $optParams Optional parameters.
   * @return Router
   * @throws \Google\Service\Exception
   */
  public function get($project, $region, $router, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router];
    $params = array_merge($params, $optParams);
    return $this->call('get', [$params], Router::class);
  }
  /**
   * Retrieves runtime NAT IP information. (routers.getNatIpInfo)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to query for Nat IP
   * information. The name should conform to RFC1035.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string natName Name of the nat service to filter the NAT IP
   * information. If it is omitted, all nats for this router will be returned.
   * Name should conform to RFC1035.
   * @return NatIpInfoResponse
   * @throws \Google\Service\Exception
   */
  public function getNatIpInfo($project, $region, $router, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router];
    $params = array_merge($params, $optParams);
    return $this->call('getNatIpInfo', [$params], NatIpInfoResponse::class);
  }
  /**
   * Retrieves runtime Nat mapping information of VM endpoints.
   * (routers.getNatMappingInfo)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to query for Nat Mapping
   * information of VM endpoints.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string natName Name of the nat service to filter the Nat Mapping
   * information. If it is omitted, all nats for this router will be returned.
   * Name should conform to RFC1035.
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @return VmEndpointNatMappingsList
   * @throws \Google\Service\Exception
   */
  public function getNatMappingInfo($project, $region, $router, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router];
    $params = array_merge($params, $optParams);
    return $this->call('getNatMappingInfo', [$params], VmEndpointNatMappingsList::class);
  }
  /**
   * Retrieves runtime information of the specified router.
   * (routers.getRouterStatus)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to query.
   * @param array $optParams Optional parameters.
   * @return RouterStatusResponse
   * @throws \Google\Service\Exception
   */
  public function getRouterStatus($project, $region, $router, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router];
    $params = array_merge($params, $optParams);
    return $this->call('getRouterStatus', [$params], RouterStatusResponse::class);
  }
  /**
   * Creates a Router resource in the specified project and region using the data
   * included in the request. (routers.insert)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param Router $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function insert($project, $region, Router $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('insert', [$params], Operation::class);
  }
  /**
   * Retrieves a list of Router resources available to the specified project.
   * (routers.listRouters)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @return RouterList
   * @throws \Google\Service\Exception
   */
  public function listRouters($project, $region, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region];
    $params = array_merge($params, $optParams);
    return $this->call('list', [$params], RouterList::class);
  }
  /**
   * Patches the specified Router resource with the data included in the request.
   * This method supports PATCH semantics and uses JSON merge patch format and
   * processing rules. (routers.patch)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to patch.
   * @param Router $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function patch($project, $region, $router, Router $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('patch', [$params], Operation::class);
  }
  /**
   * Preview fields auto-generated during router create and update operations.
   * Calling this method does NOT create or update the router. (routers.preview)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to query.
   * @param Router $postBody
   * @param array $optParams Optional parameters.
   * @return RoutersPreviewResponse
   * @throws \Google\Service\Exception
   */
  public function preview($project, $region, $router, Router $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('preview', [$params], RoutersPreviewResponse::class);
  }
  /**
   * Updates the specified Router resource with the data included in the request.
   * This method conforms to PUT semantics, which requests that the state of the
   * target resource be created or replaced with the state defined by the
   * representation enclosed in the request message payload. (routers.update)
   *
   * @param string $project Project ID for this request.
   * @param string $region Name of the region for this request.
   * @param string $router Name of the Router resource to update.
   * @param Router $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function update($project, $region, $router, Router $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'router' => $router, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('update', [$params], Operation::class);
  }
}

// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Routers::class, 'Google_Service_Compute_Resource_Routers');

❌ Cancel

🗂️ Enhanced PHP File Manager

📊 Server Information

🔧 Quick Actions

✏️ Editing: Routers.php

📤 Upload File

📁 Create Folder

📄 Create File

✏️ Rename Item

🗑️ Delete Confirmation